6-4 아반떼 xd 2002 머플러 분리 조립 교체 방법 - 4편 현대모비스 가스켓 오류 발견

In order to assemble a muffler, I had bought gasket & nuts already end muffler gasket and nuts all rusted so I bought new things before we start, take a look part list hyundai muffler, click it end muffler there is b b gasket is this 28751 click part list you can check all information look at the part number.

All right. Check others, center muffler gasket manifold gasket is same click part list manifold gasket and center muffler gasket are same I take out end muffler gasket prepare tools check muffler and tools there is rubber hang on the muffler get rid of that because already rubber is hang on car use driver and push out with leverage rule and see end rubber two rubber in the middle hang on inside direction, there is center muffler preparing muffler from backside little little the pipe is curved so you lift muffler over the torsion beam.

And push bolt in the hole of center muffler I forgot somthing gasket install it not adopt as you see before, I clearly bought right part i'm gonna lose my mind anyway it not installed I compared the gasket to center muffler gasket.

Not same size it's smaller than center one so I made a call to mobis it's impossible to explain so I visited to the mobis to explain what problem is 2nd floor I asked for giving me right one I might be wrong so I requested staff take it to me the parts are same so I started to explain I had bought the part but it's not adopt to my car what happen? Staff: it's impossible I understood the staff because their system is almost exact but it's 'almost' it might be wrong input work is conducted by a person so we had lots of talks but we didn't solve the problem I asked if I can use center muffler to end muffler? If possible, I would like to apply center muffler gasket to end muffler gasket it's adopt size is right, but guarantee that it's no problems in technical they said yes but actually I don't believe them muffler is high temperature hot gas passes the muffler there is reason why the engineer made it respectively each temperature at center and end is different it might make a problem in my common sense I don't believe them so I suggested one more could you give me other elantra model's gasket? For example, elantra hd or elantra md if the size is right, i'll use it rather so I take elantra hd gasket if it's not adopt, I use center muffler gasket if problems, I contact head of mobis asking head is more fast, I think so I assemble a muffler with elantra hd gasket elantra xd (my car) gasket no right size is different elantra hd gasket anyway it well hm is it right? Offset center muffler gasket (elantra xd, my car) part number size is right but anyway assume it put in some gap anyway gogo next video, I use erantra hd gasket but I check manifold of my car I looks right also nut is 17mm gasket hole is 17mm I bought 17mm nut too so end muffler gasket is manifold gasket! This is manifold entrance gasket material is same most hot place in exhaust pipe line so I think metal gasket is applied hyundai wrong I didn't use my car for a week, and I lose my money and time to go to mobis.

Disclaimer: None of the content above is actually owned by our website, it's just a transcript of the video provided above served for your convenience.

Comments